Contact-us !
Menu Other links
Need more information? Call us at 450 641-4810

iTouch Updates

iTouch Updates

To better our products and in reaction to international breakthroughs in agriculture, the iTouch series of controllers are regularly updated.

update your Genius controller

  • iTouch Multi-Zone
  • iTouch 8-Zone
  • iTouch Light

February 2025 New configuration available (CA2iT07V50) for iTouch Multi-Zone through WiFi download

Additions:
  1. Added 12 variable stages (Total 24).
  2. Added an activation delay for low and high water pressure alarms.
  3. Increased the maximum curve points to 160°F/80°C for high core temperature OFF of blast air heaters.
  4. Add a high temperature shutoff function for the heat pads.
  5. Make the Actual Main Set Point parameter visible at all times.
  6. Disable feeders associated with feed augers stopped by their proximity switches.
  7. Add a curve for the Critical High Temperature parameter.
  8. Add the ability to operate variable and on/off stir fans on the minimum ventilation timer.
  9. Added a display of the current date and time in System Configuration.
  10. Added a batch start date for batches in Batch Management.

To download the latest version of the configuration manual


January 2025 New configuration (CA2iT08V7) available for iTouch 8-Zone (CA2iT08V7) through WiFi download.

 
  1. Add 3 water pressure probes (total 4).
  2. Add a high/low pressure alarm for the water pressure probes.
  3. Add an option to hide Feed Augers/Feeders’ groups when Multi-Feed is enabled.
  4. Change the default precision value to 1.0% for the Multi-Feed positioners.
  5. Add current alarms >500mA and >1000mA for the FarmGuard.
  6. Add FarmQuest display of FarmGuard alarm types.
  7. Change the defective probe detection lower limit of the inside temperature to -50 degrees Celsius.
  Corrections :
  1. Correction of the EPS alarms activating after a certain number of communication errors.
  2. Correction of the conversion of static pressure into inches of water read by the Press+ sensors.
 

To download the latest version of the configuration manual


August 2022 New configuration (CA2iT05V13) available for iTouch Light through WiFi download.

  • Addition of the Precision+ mode for poultry scales.
  • Render daily the cumulated silo consumption.
  • Addition of two Minimum Ventilation timers per zone.
  • Addition of a Minimum Ventilation timer for variable recirculation ventilators.
  • Addition of a Minimum Temperature function for variable heaters.
  • Addition of a support for the GE-HUM+ humidity probe.
  • Display of assigned zones using A to D letters instead of numbers 1 to 4.
  • Addition of a curve option for the maximum speed of stage 1.
  • Addition of  a curve option for the minimum/maximum speed of variable recirculation ventilators.
  • Correction of minimum and maximum humidity.
  • Correction of air inlets and EA blowers when they are linked.
  • Correction of high temperature alarm activation when no probe is assigned to the zone.

To download the latest version of the configuration manual