ON/OFF module, 2 outputs
Modules designed to drive two small or large diameter fans.
Up to 1.5 HP under the control of an IC type controller that would result in a fresh air environment for your livestock.
2-output module
Select options
This product has multiple variants. The options may be chosen on the product page
2-output module
Curtain or air inlet module
The CIM-1 is designed to operate an air inlet baffle board or air inlet curtain via an actuator motor which operates under the control of a IC control system resulting in a clean air environment for your livestock.
The CIM-1 provides you with automated control over its two stages via the use of the MSC, or alternatively by manual switch control on the CIM-1 front panel.
Under MSC control, the CIM-1 keeps you constantly informed of its two stages via LED indications.
Curtain or air inlet module
Curtain or air inlet module
0-10 V Variable speed module
The VSD series module is designed to control a variable speed fan according to a 0-10 V or a 4-20 mA signal from a master system.
The VSD-1MC, VSD-1MC-20 or VSD-1MC-40 modules can be operating manually with the switch and potentiometer on the faceplate.
VSD module
Select options
This product has multiple variants. The options may be chosen on the product page
VSD module
Mechanical Thermostat
The TH5-20 thermostat is designed to provide precise control of heating, cooling, and ventilation systems.
Weatherproof Thermostat TH5-20
Weatherproof Thermostat TH5-20
0-10 Volts variable controller
Recognized leader when it comes to smart controllers aimed at the agricultural sector, Monitrol greatly facilitates remote livestock management for all types of animal production by way of the FarmQuest application.
0-10 V variable controller
0-10 V variable controller
24 VDC Actuator position module
Recognized leader when it comes to smart controllers aimed at the agricultural sector, Monitrol greatly facilitates remote livestock management for all types of animal production by way of the FarmQuest application.
The SVIM-1/24LE is a positioner which controls motorized air inlets. The SVIM-1/24LE is connected to a master control, either an SVC or an IC (configurable control).
With the commands received from the IC, the SVIM-1/24LE positions an air inlet according to the ventilation request.
24 VDC Actuator position module
- Functions either using time settings or potentiometer
- One interior or exterior probe for added security or precision
- Includes one 2004-5k/SV1 (1 foot) temperature probe
24 VDC Actuator position module
Variable speed controller without display
The SA-10C controller is designed to control a variable-speed fan based on a set temperature and a temperature sensor. The Desired Temperature, Differential, Minimum Speed, and Full-Speed Start are fully adjustable. The SA-10C operates on 115/230 V and 50/60 Hz.
This controller comes in a non-corrosive PVC enclosure that is resistant to moisture and dust. It is covered by a full two-year warranty.
OUTPUT:
• Temperature range: 45 to 95° F (7 to 35°C)
• 1 temperature probe extendable up to 300' (100 m)
INPUT:
• 12 FLA, 115/230 VAC, maximum capacity
• 15 amp fuse protection
ELECTRICAL RATING:
• Operates on 115 or 230 VAC, 50/60 Hz
Variable speed controller without display
Pressure equalization control PEC-1
Two settings on the display are available with PEC-1 control.
Pressure equalization control
Select options
This product has multiple variants. The options may be chosen on the product page
- The minimum fan speed can be set to match the idle capability of the fan controlled by the PEC-1 control.
- The desired room static pressure is set to establish the control logic for pressure control.
- PEC-1 controller only
- Kit, PEC-1 controller and SPS-1 static pressure sensor
Pressure equalization control
115/230 VAC Actuator position module
Recognized leader when it comes to smart controllers aimed at the agricultural sector, Monitrol greatly facilitates remote livestock management for all types of animal production by way of the FarmQuest application.
The SVIM-1/LE is a positioner which controls motorized air inlets. The SVIM-1/LE is connected to a master control, either an SVC or an IC (configurable control).
With the commands received from the IC, the SVIM-1/LE positions an air inlet according to the ventilation request.
24 VDC Actuator position module
Select options
This product has multiple variants. The options may be chosen on the product page
- Functions either using time settings or potentiometer
- One interior or exterior probe for added security or precision
- Includes one 2004-5k/SV1 (1 foot) temperature probe
24 VDC Actuator position module
Actuator module with potentiometer – DIP-1/V
Servo-positioner for actuator with potentiometere - DIP-1/V
Air inlet positioner with potentiometer
Select options
This product has multiple variants. The options may be chosen on the product page
- 110 VDC or 24 VDC power potentiometer (115 VAC) 50/60Hz
- 1 exterior probe 2004-1KLT included
Air inlet positioner with potentiometer
8 input card (X1399)
Recognized leader when it comes to smart controllers aimed at the agricultural sector, Monitrol greatly facilitates remote livestock management for all types of animal production by way of the FarmQuest application.
This 8 input card includes casing and transformer.
8 input card (X1399)
8 input card (X1399)
Digital multi-stage thermostat
The MST product line provides you with full control over temperature by heating or cooling, resulting in a comfortable environment for your livestock.
The MST-5 provides the next features:
Digital multi-stage (5) thermostat, VARIFAN, 5 stages.
Select options
This product has multiple variants. The options may be chosen on the product page
- Compatible with 2 speed motors
- Hi / Lo temperature recall
- Timer on first stage non-active above the set point
- Timer for drip cool unit
- Automatic temperature ramping
- Adjustable differential for cooling and heating stages
Digital multi-stage (5) thermostat, VARIFAN, 5 stages.